In our upcoming September 4th edition of "Last Mile," we publish a snippet of the following article by Der Dorn. Submitted for your approval is his complete missive.
Bytes, bits, KiBs, and MiBs, or Why Can we not use Right Words for Right Terms?
By Der Voron
As everyone of us knows, when we need to say "1,024 bytes" we say "1
kilobyte", when we need to say "1,024 bits" we say "1 kilobit", when
we need to say "1,024 kilobytes" we say "1 megabyte", and when we
need to say "1,024 kilobits" we say "1 megabit". Because 1,024
is "approximately equal" to 1,000, we use "kilo" for 1,024, "mega"
for 1,024*1,024, "giga" for 1,024*1,024*1,024, "tera" for
1,024*1,024*1,024*1,024, "peta" for 1,024*1,024*1,024*1,024*1,024,
and so on, being well-aware that in "real life" "kilo" is for
1,000, "mega" for 1,000,000, "giga" for 1,000,000,000, and so on.
Maybe it is not as bad as it seems, but one of the problems that
arise with this system is that, for example, hard drive manufacturers
advise the capacity of their drives either using "1,024s",
or "1,000s", and you cannot know for sure which manufacturer uses
which number. The same with telecommunication devices: kilobit is for
1,000 or 1,024 bits?
In 1999 IETC, i.e. International Electrotechnical Commission, decided
to solve this problem and proposed names KiB for "kilobyte"
(spelled "keebeebyte"), Kib for "kilobit" (with b minuscule,
spelled "keebeebit"), MiB for "megabyte" (spelled "meebeebyte"), Mib
for "megabit" (again with b minuscule, spelled "meebeebit"), and so
on for "gigabytes", "gigabits", "terabytes", "terabits", etc. The
proposal wasn't accepted because of some pronunciation difficulties.
After I read about this, I got amuzed. Why did they create such
strange names? Wouldn't it be simpler to say letter names instead
of "keebee" and "meebee"? Letter K is pronounced "kay", letter M is
pronounced "em", letter G is pronounced "gee" (for "giga" prefix),
letter T is pronounced "tee" (for "tera" prefix), etc.
Thus, for example:
1024 bytes -- 1 Kbyte ("kay-byte");
1024 bits -- 1 Kbit ("kay-bit");
1024 Kbytes -- 1 Mbyte ("em-byte");
1024 Kbits -- 1 Mbit ("em-bit").
1024 Mbytes -- 1 Gbyte ("gee-byte")
1024 Mbits -- 1 Gbit ("gee-bit")
1024 Gbytes -- 1 Tbyte ("tee-byte")
1024 Gbits -- 1 Tbit ("tee-bit")
As you can see, the names would remain untouched, but the
pronunciation would change (and wouldn't contain "kilos" and "megas",
that is "thousands" and "millions"). Thus, may I submit my proposal
for the consideration of computer and telecom community!
Der Voron is the author of "Starcraft", an exploration of UFOlogy.
reddit
REPORTS
ANALYTICS
Follow 
